IACS cert. MK6 Stevpris Anchor Offshore Projects High Holding Power Anchor

MK6 Stevpris Anchor Offshore Projects Anchor High Holding Power Anchor

Stevpris MK6 anchor is an anchor widely used in various offshore engineering and semi-submersible drilling platforms operations today. There is a new design over this anchor. The fluke of the new designed anchor has large area, and the two sharp teeth of the fluke make the anchor more easily penetrate into the soil, and the depth of penetration is large, and the drag distance required to achieve the maximum grip force is short. The angle between the fluke and the anchor shank is adjustable, 50degrees in very soft clay (sludge), 41degrees in medium hardness clay, and 32degrees in sand and hard mud. The maximum holding capacity in the sludge is up to 311 t (44 times its own weight), the maximum holding force in medium hardness clay is 436 t (62 times its own weight), and the maximum holding force in sand and hard mud is up to 561. t (80 times the weight).

Advantage of MK6 Anchor
Extreme holding power due to wider fluke and deeper penetration

Ultimate structure integrity to withstand the toughest deep water condition

Easy handling, fits most anchor racks

Accommodates the widest range of soils.

Excellent stability due to slim design and easy penetration.

Certificate:
ABS, LR, BV, GL, RINA, DNV, NK, KR, CCS

Features:

• MK5/MK6 Anchor is easy to handle, install and retrieve and is used to secure semi-submersible rigs and permanent installations.

• MK 5/MK6 Anchor does well in hard soils such as limestone, calcarenite, very dense sands, and coral.

High Holding Power Anchor MK6 Type Date Sheet

Our Advantage:

1. Are you Manufactuer?

Yes we are Anchor Chain Manufactuer, our factory located near changjiang river with convenient transportation to shanghai port

shanghai docking place, chengxi qidong docking place and zhoushan docking place

2. Your quality?

Our factory have KR LR BV NK CCS ABS DNV GL RMRS RINA ...all IACS approved you can trust our quality.

we have skillful technicist team and quality team and with IACS approved workers.

3. Your production?

We have 30 sets flash butt welded lines can production 16mm~200mm anchor chain, with 2200T/Month over 30000T annuel

and our normally production time is 15days. with IACS cert.

4. Could you offer other advantage?

we keep 50~122mm anchor chain steel round bar and anchor chain in stock can delivery 1~5days for 10~22 length.

And we can offer anchor chain repair install and clean work in china singpaore or other Euro port can offer you on stop service, save your docking time and cost.

And we keep some anchor in stock with LR / NK cert. 

TAG: STEVPRIS ANCHOR  OFFSHORE ANCHOR HIGH HOLIDNG POWER ANCHOR