Marine AC-14 HHP Anchor With IACS Cert. High Holding Power Anchor

AC-14 Marine Anchor High Holding Power Anchor

High holding power (HHP) anchors

A “high holding power” anchor is to be suitable for ship’s use and is not to require prior adjustment or special placement on the sea bottom.

When special type of anchors designated “high holding power anchor” of proven superior holding ability are used as bower anchors, the mass of each anchor may be 75% of the mass required for ordinary stockless bower anchors in the Table 1.

For approval and/or acceptance as a HHP anchor satisfactory tests are to be made on various types of bottom, and the anchor is to have a holding power at least twice than of an ordinary stockless anchor of the same weight. Full scale tests are to be carried out at sea on various types of bottom and to be applied to anchors the weights of which are, as far as possible, representative of the full range of sizes proposed; for a definite group of the range the two anchors selected for testing (ordinary stockless anchors and HHP anchors) should be of approximately the same weight, and should be tested in association with the size of chain cable appropriate to this weight.

Product Details:

• High Holding Power anchor
• Material: ZG200-400
• Nominal Weight: 56kg to 20000kg
• Finishing: black painting or hot dip galvanized
• Optional Material: Stainless steel
• Certificate: DNV-GL, BV, ABS, LRS, RINA, IRS, RS, CCS, KR, NK
• Other Anchor Type: Delta Anchor Danforth Anchor MK5 Anchor MK6 Anchor Spek Anchor Hall Anchor
• Anchor Chains Mooring Chains Steel Mooring Buoy
• 6225KG 6525KG 6975KG 7425KG 7878KG 8775KG 8325KG 9225KG 9675KG 10125KG 10575KG 11025KG in stock for detailes please contact us

10275kg AC-14 7 Days to docking yard with LR cert.

Our Advantage:

1. Are you Manufactuer?

Yes we are Anchor Chain Manufactuer, our factory located near changjiang river with convenient transportation to shanghai port

shanghai docking place, chengxi qidong docking place and zhoushan docking place

2. Your quality?

Our factory have KR LR BV NK CCS ABS DNV GL RMRS RINA ...all IACS approved you can trust our quality.

we have skillful technicist team and quality team and with IACS approved workers.

3. Your production?

We have 30 sets flash butt welded lines can production 16mm~200mm anchor chain, with 2200T/Month over 30000T annuel

and our normally production time is 15days. with IACS cert.

4. Could you offer other advantage?

we keep 50~122mm anchor chain steel round bar and anchor chain in stock can delivery 1~5days for 10~22 length.

And we can offer anchor chain repair install and clean work in china singpaore or other Euro port can offer you on stop service, save your docking time and cost.

And we keep some anchor in stock with LR / NK cert.